Alarm Digital Output - CARLO GAVAZZI WM24-96 - PROGRAMMING User Manual

18
Programming
S
S
S
S
S
1.2..
..2.1
Energy Meters Menu
13
user to set the parameters of the
alarm digital output. Choose the
"diGout1- ALr" function by means
of the
menu press
lowing parameters:
VAr: choose the variable to be
associated to the alarm activation
by means of the
and confirm with
rnG: choose the decimal point
position.
on: activation set-point, value of the
variable over which the alarm is acti-
vated. Select the value of the variable
by means of the
and confirm it with
1.2..
..2.1
oFF: deactivation set-point, value of
the variable over which the alarm is
deactivated. Select the value of the
variable by means of the
nd: normally de-energized output
when there is no alarm.
nE: normally energized output
when there is no alarm.
Select the output status by means
of the
firm it with
9

Alarm Digital Output

This function allows the
S
keys and confirm it with
and
S
;
22
keys: to enter the
. Then, set the fol-
and
S
.
and
S
;
keys and con-
Digital Filter
keys
keys
and
S
;
20