Download A Digi Mib; Supported Snmp Traps - Digi Connect Series User Manual

SNMP device monitoring capabilities

Download a Digi MIB

To download a Digi MIB:
1. Locate the support page for your product:
2. Under Product Support, click the Utilities tab.
3. Locate the MIB you want to view under General Diagnostics, Utilities, and MIBs.

Supported SNMP traps

You can enable or disable SNMP traps. Supported SNMP traps include:
n
Authentication failure
n Login
n
Cold start
n
Link up
n
Alarms issued in the form of SNMP traps
All products support MIBs for serial alarms/login traps/RFC1215.
Products with the geofencing/GPS feature support MIBs for geofencing.
Products with mobile/cellular capability support MIBs for mobile alarms.
From the web interface, you can enable/disable traps at Configuration > System > SNMP >
Enable Simple Network Management Protocol (SNMP) traps.
You can configure alarms at Configuration > Alarms > Alarm Conditions > Alarm n >
Alarm Destinations > Send SNMP trap to following destination when alarm occurs.
Digi Connect Family and ConnectPort TSFamily
Download a Digi MIB
142