Table of Contents
Advertisement
6 Message Reference
Parameter Description:
liun_pri
The relative priority for each LIU using the values taken from the following
table:
Status Response
The confirmation message (if requested) indicates success by status of zero.
On error, the following status value can be found in the confirmation
message.
Value
0xff
78
Value
0
No change to the interface's priority.
1 ... 32
New priority value for the line interface. The value 1 indicates highest
priority, 32 the lowest priority. If two interfaces are given the same priority,
the lowest-numbered interface is used first.
255
Special value indicating that the line interface must not be used for clock
recovery.
Mnemonic
None
Meaning
Description
Request to configure clock recovery priority order fails.
Advertisement
Table of Contents
Need help?
Do you have a question about the DSI SPCI Network Interface Boards and is the answer not in the manual?