General Module Identification Message - Dialogic DSI SPCI Network Interface Boards Programmer's Manual

6.2.5

General Module Identification Message

Synopsis:
Message used to request the module type and software revision number.
Message Format:
Field Name
Type
Id
Src
Dst
rsp_req
hclass
status
err_info
len
Offset
0
2
3
4
Description:
This message is provided to request a reply indicating the software version
for module under test. On receipt of this request, the module returns the
message with status "SUCCESS" to the sender including the information
requested.
Note: This message can be sent to the on-board management task to obtain the version
of the code file running on a live system.
Parameter Description:
maj_rev
Major revision identifier for the object being queried.
min_rev
Minor revision identifier for the object being queried.
®
Dialogic DSI SPCI Network Interface Boards Programmer's Manual Issue 5
MESSAGE HEADER
Meaning
GEN_MSG_MOD_IDENT (0x6111)
0
Sending module_id
on-board management task (0x8e)
used to request a confirmation
0
Status Response – zero on success
0
28
PARAMETER AREA
Size Name
2 reserved
1 maj_rev
1 min_rev
24 text
49