Table of Contents
Advertisement
• To toggle from a "delayed entry" mode to an "Instant" mode,
Step 4
press the [STAY] key again.
• The instant icon will illuminate indicating that the entry/exit doors
have no entry delay.
USING THE QUICK ARM (Optional, see page 1)
The Quick Arm feature may be used if it is enabled. Quick Arm will allow
the user to arm the security system in the AWAY mode by pressing the
[EXIT] key, or arm in the STAY mode by pressing the [STAY] key. This
feature is used for ARMING ONLY, and will not disarm the security system.
This is ideal for a maid or baby sitter code, etc.
CHANGING MODES WHILE SYSTEM IS ARMED
Pressing the [STAY] key will turn on/off (toggle) a delay on entry/exit
doors and turn on/off (toggle) the instant icon.
(Optional) Press the [BYPASS] key at this time to turn on/off (toggle)
all designated interior zones.
(Optional) When armed, pressing the [EXIT] key will start the exit
delay, enabling you to leave the building.
The instant icon needs to be off at this time if you plan on re-entering
the building; otherwise you will create an alarm. You may restore an
entry delay by pressing the [STAY] key again.
DISARMING THE SYSTEM
When you enter the protected area through one of the designated
Entry/Exit doors, the keypad control will sound a continuous tone for the
duration of the entry delay time, or until you enter a valid code.
armed icon will go off and the tone will stop. The security system is now
DISARMED.
If a valid code is not entered before the end of the entry
delay, an alarm will occur. (NOTE: If the armed icon is flashing during
the entry delay, the alarm system has been activated in your
NX1448E Icon Keypad
IMPORTANT!
The
Page 15
Hide quick links:
Advertisement
Table of Contents
