Glossary Of Terms - GE NX-1448E - Security NetworX 48-Zone Fixed User Manual

Abort Delay
Authority Level
Central Station
Chime Feature
Codes
Duress Code
Forced Arming
Function Code
Group Bypass
Instant/Delay
Master Code
Page 8

GLOSSARY OF TERMS

An option that allows a delay in reporting to the
central station.
The level of access an individual has when using
an alarm panel.
The location where alarm data is sent during an
alarm report.
An option that allows the keypad to sound a
ding-dong
opened.
Can be either User Codes (relating to a person)
or Function Codes (a toggle switch to turn
specific functions on/off). NOTE: A system may
have either 99 four-digit codes or 66 six-digit
codes, but not a mixture of the two.
An option that allows a special code to be sent to
the central station that indicates the alarm
system is being operated under duress.
An option that allows the system to be turned on
(ARMED) with one or more zones open. A system
that is ready to be "force armed" will flash the
ready icon. (Note: Those zones that are not
ready will not create an alarm.)
A Function Code is either a four (4) or six (6)
digit code that has been programmed by the
installer to operate a device.
An option that allows the user to bypass multiple
zones with a single operation.
An option that allows an instant alarm condition
for Entry/Exit doors, or grants a delay to allow
someone to enter/exit the building without an
alarm, or before entering a user code to disarm.
A master arm/disarm code that can program
other user codes.
whenever an
NX1448E Icon Keypad
entry/exit door is