Emergency Activation Keys - GE NX-1448E - Security NetworX 48-Zone Fixed User Manual

EMERGENCY ACTIVATION KEYS

NOTES: You must hold these keys for 2 seconds to activate these
functions. Your system may not be programmed for these activation keys
(see page 1). You should press these keys only in an emergency situation
that requires response by emergency personnel. If your system is
programmed for these functions, the following reports can be sent.
Fire Key – This key can activate the fire alarm when pressed for two
seconds. If your system is connected to a monitoring center, an
emergency report could be sent to that center.
Auxiliary Emergency Key – This key can activate the auxiliary alarm
when pressed for two seconds. If your system is connected to a
monitoring center, an emergency report could be sent to that center.
Police (Panic/Hold-Up) Key - This key can sound a local audible alarm
when pressed for two seconds. If your system is connected to a
monitoring center, an emergency report could be transmitted to that
center. NOTE: Some Panic/Hold-Up alarms are programmed to be silent
at the protected site while reporting an alarm to the monitoring center.
Check with your installing company to determine how your security
system will respond to the Panic/Hold-Up activation.
Page 10 NX1448E Icon Keypad