Table of Contents
Advertisement
Step 4
Enter the "Month Code". Must always be two (2) digits.
01 = January
02 = February
03 = March
04 = April
Step 5
Enter the "Day Code". Must always be two (2) digits.
Example: The 5
Step 6
Enter the last two digits of the "Year Code".
Example: For 1997 enter [9]–[7].
The ready icon will appear.
SETTING THE SYSTEM CLOCK
Step 1
Press [r]-[9]-[7]. Enter Code icon will appear.
Step 2
Enter a ["Master Code"]. Then the service icon will begin to
flash.
Step 3
Enter the "hour code" which must be two (2) digits. Note: The
clock is a 24-hour clock. Refer to the following table.
Step 4
Enter the "minutes code" which must be two (2) digits. Then
the ready icon will come on constant.
Example: 7 minutes after would be entered [0]–[7].
Time
Hour Code
12:00
Midnight
1:00 AM
2:00 AM
3:00 AM
4:00 AM
5:00 AM
6:00 AM
7:00 AM
Page 22
would be entered as [0]–[5].
t h
Time
00
8:00 AM
01
9:00 AM
02
10:00 AM
03
11:00 AM
12:00
04
Noon
05
1:00 PM
06
2:00 PM
07
3:00 PM
05 = May
06 = June
07 = July
08 = August
Hour Code
08
09
10
11
12
13
14
15
09 = September
10 = October
11 = November
12 = December
Time
Hour Code
4:00 PM
5:00 PM
6:00 PM
7:00 PM
8:00 PM
9:00 PM
10:00 PM
11:00 PM
NX1448E Icon Keypad
16
17
18
19
20
21
22
23
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the NX-1448E - Security NetworX 48-Zone Fixed and is the answer not in the manual?
Questions and answers