Table of Contents
Advertisement
INSTANT ICON
The instant icon is "on" when there is no delay on your entry/exit
door(s). Any time the instant icon is "on" and the exit delay has expired,
the opening of an entry/exit door will produce an immediate alarm. The
instant icon can be toggled on or off by pressing the [Stay] key while
the system is armed. When the instant icon is "off", the entry/exit
door(s) is delayed.
LISTEN-IN ICON
Listen-in icon is on when an NX-534 is active in listen-in mode.
POWER ICON
The power icon is on if the primary power is on. The power icon will flash
if the system has a low battery condition.
READY / NOT READY ICON
The ready icon is "on" when the system is ready to arm and "flashes" if
ready to force arm. The not ready icon is on when the system is not
ready to arm because of a zone(s) being faulted.
SILENCED ICON
The silenced icon appears after a code has been entered to silence the
siren but the zone has not been cleared.
STAY LIGHT
The stay light is "on" when all interior (motion detector) zones are
bypassed.
TAMPER/TROUBLE ICONS
The tamper or trouble icon is on when a zone(s) is tampered or in
trouble. Press [r]–[2] and refer to the Service Menu section on page 23
of this manual for further instructions.
ZONE ICON
The zone icons are "off" when everything is normal. A zone icon will be
"on" if the zone has been bypassed. If a zone icon is "flashing", that
zone is in alarm or has been faulted. If a zone icon is "flashing" rapidly,
it means that the zone is in a trouble condition.
Page 12
NX1448E Icon Keypad
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the NX-1448E - Security NetworX 48-Zone Fixed and is the answer not in the manual?
Questions and answers