Setting The Keypad Lighting; Service Menu - GE NX-1448E - Security NetworX 48-Zone Fixed User Manual

SETTING THE KEYPAD LIGHTING

Step 1 Press [r]-[9]-[1].
Step 2 Press the [•] and [–] scroll keys to lighten or darken the
illumination behind the buttons and the LCD display.
usually easier to set this adjustment in a darkened room.
The service icon will be "on" if the security system requires service.
If the service icon is "on", press [r]-[2] to determine the service
condition. If a zone(s) is tampered, the tamper icon will flash and the
zone icon(s) will be on. If a zone(s) is troubled, the trouble icon will flash
and the zone icon(s) will be on.
more zone icon(s) will illuminate indicating what service(s) is required.
Press the [•] and [–] to scroll between tamper, trouble and other service
conditions. Call your service provider immediately for these problems.
The following table provides a list of what each icon means in a service
condition.
ICON
1 SYSTEM FAULT - Press the [1] key. The zone icon(s) that is
illuminated corresponds to the system fault(s) below:
1 Over Current Fault
2 Siren Trouble
3 Box Tamper
4 Expander Power
Note: Faults 1 & 2 are global in nature and will affect all
partitions of a multi-partition system. Press the [#] key to
return to the 1 of 8 service icons.
2 RESERVED
NX1448E Icon Keypad

SERVICE MENU

If the service icon is flashing, one or
PROBLEM
5 Expander Low Battery
6 Expander Box Tamper
7 Expander Trouble
8 Ground Fault
It is
Page 23