1-Port Oc-192C/Stm-64 Pos/Rpr Xfp Spa Interface Specifications; Port Oc-192C/Stm-64 Pos/Rpr Xfp Spa Optical Transceiver Modules, Connectors, And Cables - Cisco 12000 - Series Chassis Modular Expansion Base Hardware Installation Manual

Chapter 2 Overview: Cisco 12000 Series Router Shared Port Adapters
Table 2-28 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs (continued)
LED Label
ACTIVE
STATUS

1-Port OC-192c/STM-64 POS/RPR XFP SPA Interface Specifications

The framer processes incoming and outgoing SONET or SDH frames. The framer operates at
OC-192c/STM-64 line rates (9.95 Gbps).
Packet data is transported with a user-configured encapsulation (such as Point-to-Point Protocol [PPP])
and is mapped into the STS-192c/STM-64 frame.
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA interface is compliant with the following RFCs:
•
•
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA also provides support for SNMP v1 agent
(RFC 1155–1157) and RFC 1213:
•
•
•
•
1-Port OC-192c/STM-64 POS/RPR XFP SPA Optical Transceiver Modules,
Connectors, and Cables
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA uses a single-mode, 9.95 Gbps, OC-192c optical fiber
(SONET STS-192c or SDH STM-64) optical transceiver module for SONET and SDH connection to the
network.
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA supports the following types of optical transceiver
module:
•
•
•
Cisco Systems qualifies the optics that are approved for use with its SPAs. As of Cisco IOS
Release 12.0(31)S, the above-listed XFPs are the only optical transceiver modules qualified for use.
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
Color State
Off Off
Green On
Amber On
Off Off
Green On
Amber On
RFC 1662, PPP in HDLC-like Framing
RFC 2615, PPP over SONET/SDH
RFC 1155, Structure and Identification of Management Information for TCP/IP-based Internets
RFC 1156, Management Information Base for Network Management of TCP/IP-Based Internets
RFC 1157, Simple Network Management Protocol (SNMP)
RFC 1213, Management Information Base (MIB) for Network Management of TCP/IP-Based
Internets:MIB II.
Single-mode short-reach (SR) XFP module—XFP-10GLR-OC192SR
Single-mode intermediate-reach (IR) XFP module—XFP-10GER-OC192IR
Single-mode very-long reach XFP module—XFP-10GZR-OC192LR
1-Port OC-192c/STM-64 POS RPR XFP SPA Overview
Meaning
Port is not enabled by software.
Port is enabled by software, and loopback is off.
Port is enabled by software, and loopback is on.
SPA power off.
SPA is ready and operational.
SPA power is on and good, and the SPA is being configured.
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
2-39