Cisco 12000 Sip-501 Physical Specifications; Spa Subslot Numbering On The Cisco 12000 Sip-501; Figure 1-15 Subslot Locations For The 1-Port 10-Gigabit Ethernet Spa; Table 1-12 Cisco 12000 Sip-501 Leds - Cisco 12000 - Series Chassis Modular Expansion Base Hardware Installation Manual

Cisco 12000 SIP-501 Overview
2
3
4
The Cisco 12000 SIP-501 LEDs are described in

Table 1-12 Cisco 12000 SIP-501 LEDs

LED Label
Status
Rate

Cisco 12000 SIP-501 Physical Specifications

The Cisco 12000 SIP-501 physical specifications are shown in the following table.

Table 1-13 Cisco 12000 SIP-501 Physical Specifications

Description
Physical dimensions
Shipping weight
Operating temperature
Relative humidity
Storage temperature

SPA Subslot Numbering on the Cisco 12000 SIP-501

The Cisco 12000 SIP-501 accepts up to 4 single-width SPAs or 1 dual-width SPA.
Figure 1-15
right SPA slot is subslot 1. If one dual-width SPA is installed, it is recognized as being in subslot 0.

Figure 1-15 Subslot Locations for the 1-Port 10-Gigabit Ethernet SPA

Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
1-16
SPA subslot 1
SPA subslot 2
SPA subslot 3
Color
Yellow
Green
Off
Green
shows a Cisco 12000 SIP-501 with 2 SPAs installed. The left SPA slot is subslot 0 and the
1
Chapter 1 Overview: Cisco 12000 Series Router SPA Interface Processors
6
Status LED
7
Rate LED
Table 1-12.
State Meaning
On SIP is powered and IOS is loading.
On SIP is active.
Off SIP is SIP-401 or SIP-501.
On SIP is SIP-601.
Specifications
Occupies one line card slot on a Cisco 12000 Series Router
10kg
32 to 104°F (0 to 40°C)
10 to 90 percent, noncondensing
–4 to 149°F (–20 to 65°C)
2
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007