1-Port Oc-192C/Stm-64 Pos/Rpr Spa Leds; Figure 2-21 1-Port Oc-192C/Stm-64 Pos/Rpr Spa Faceplate; Table 2-27 1-Port Oc-192C/Stm-64 Pos/Rpr Spa Leds - Cisco 12000 - Series Chassis Modular Expansion Base Hardware Installation Manual

1-Port OC-192c/STM-64 POS SPA Overview
The 1-Port OC-192c/STM-64 POS/RPR SPA uses a single,10-Gbps fixed optical receptacle allowing a
connection to single-mode optical fiber. For more information on the optical fiber cables used with this
SPA, see the
Cables" section on page
The following sections describe the 1-Port OC-192c/STM-64 POS/RPR SPA:
•
•
•

1-Port OC-192c/STM-64 POS/RPR SPA LEDs

The 1-Port OC-192c/STM-64 POS/RPR SPA has six LEDs, as shown in

Figure 2-21 1-Port OC-192c/STM-64 POS/RPR SPA Faceplate

1
2
3
The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only. In
Note
Cisco IOS Release 12.0(31)S, RPR/SRP mode is not supported.
The 1-Port OC-192c/STM-64 POS/RPR SPA LEDs are described in

Table 2-27 1-Port OC-192c/STM-64 POS/RPR SPA LEDs

LED Label
WRAP
PASSTHRU
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
2-34
"1-Port OC-192c/STM-64 POS/RPR SPA Fixed Optical Transceiver, 40-Pin Connector, and
2-36.
1-Port OC-192c/STM-64 POS/RPR SPA LEDs, page 2-34
1-Port OC-192c/STM-64 POS/RPR SPA Interface Specifications, page 2-35
1-Port OC-192c/STM-64 POS/RPR SPA Fixed Optical Transceiver, 40-Pin Connector, and Cables,
page 2-36
TX
WRAP LED
PASSTHRU LED
MATESYNC LED
Color State
Off Off
Green On
Amber On
Off Off
Amber On
Chapter 2 Overview: Cisco 12000 Series Router Shared Port Adapters
1 3 5
2 4
RX
4 CARRIER LED
5 ACTIVE LED
6 STATUS LED
Meaning
Port is not in wrap mode.
Port is in wrap mode somewhere on the ring.
Port is in wrap mode locally.
Port is not in pass-thru mode.
Port is in pass-thru mode.
Figure 2-21.
Table 2-27.
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
6
SPA-OC192POS LR