Table 1-6 Cisco 12000 Sip-600 Leds; Table 1-7 Cisco 12000 Sip-600 Physical Specifications - Cisco 12000 - Series Chassis Modular Expansion Base Hardware Installation Manual

Chapter 1 Overview: Cisco 12000 Series Router SPA Interface Processors
1
2
The Cisco 12000 SIP-600 LEDs are described in
Table 1-6
LED Label
Status
Cisco 12000 SIP-600 Physical Specifications
The Cisco 12000 SIP-600 physical specifications are shown in the following table.
Table 1-7
Description
Physical dimensions
Shipping weight
Operating temperature
Relative humidity
Storage temperature
SPA Subslot Numbering on the Cisco 12000 SIP-600
The Cisco 12000 SIP-600 accepts 2 single-width SPAs or 1 dual-width SPA.
Figure 1-7
right SPA slot is subslot 1. If one dual-width SPA is installed, it is recognized as being in subslot 0.
Figure 1-7
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
SPA subslot 0
SPA subslot 1
Cisco 12000 SIP-600 LEDs
Color
Yellow
Green
Cisco 12000 SIP-600 Physical Specifications
shows a Cisco 12000 SIP-600 with 2 SPAs installed. The left SPA slot is subslot 0 and the
Subslot Locations for the 1-Port 10-Gigabit Ethernet SPA
1
3 Ejector Levers
4 Status LED
Table 1-6.
State Meaning
On SIP is powered and IOS is loading.
On SIP is active.
Specifications
Occupies one line card slot on a Cisco 12000 Series Router
10kg
32 to 104°F (0 to 40°C)
10 to 90 percent, noncondensing
–4 to 149°F (–20 to 65°C)
2
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
Cisco 12000 SIP-600 Overview
1-9