Cisco 12000 - Series Chassis Modular Expansion Base Hardware Installation Manual page 13

Preface
Revised: Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
This preface describes the objectives and organization of this document and explains how to find
additional information on related products and services. This preface contains the following sections:
•
•
•
•
•
Document Change History
Table 1
Table 1
Release No. Revision
12.0(31)S Release
12.0(31)S
12.0(31)S2 Release
12.0(31)S2
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
Document Change History, page xiii
Objectives, page xv
Organization, page xv
Related Documentation, page xv
Obtaining Documentation, page xv
provides a list of the changes to this document.
Document Change History Table
Date
April 26, 2005
September 22, 2005 Provides descriptions and installation instructions for the following
Change Summary
Initial release and 1st publication. Provides descriptions and
installation instructions for the following SPAs installed in a
Cisco 12000 SIP-400 or a Cisco 12000 SIP-600:
1-Port 10-Gigabit Ethernet SPA
•
5-Port 10 Gigabit Ethernet SPA
•
10-Port Gigabit Ethernet SPA
•
2-Port and 4-Port Clear Channel T3/E3 SPA
•
• 2-Port and 4-Port Channelized T3 SPA
• 1-Port OC-192c/STM-64 POS/RPR SPA
SPAs installed in a Cisco 12000 SIP-600:
2-Port OC-48c/STM-16 POS SPA
•
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
xiii