16-Port T1/E1 Interface Module; 4-Port Oc3/Stm-1 (Oc-3) Or 1-Port Oc12/Stm-4 (Oc-12) Interface Module - Cisco ASR 902U Hardware Installation Manual

Overview

16-Port T1/E1 Interface Module

The 16-port T1/E1 interface module provides connectivity for up to 16 T1/E1 ports through a 100-pin Amplimite
connector. The T1/E1 interface module requires the use of a patch panel to provide RJ48 (T1) or BNC (E1)
connectors. The figure below shows the interface module.
Figure 16: 16 x T1/E1 Interface Module
For information on supported SFP modules, see
Sheet.
For more information about installing a T1/E1 interface module, see

4-port OC3/STM-1 (OC-3) or 1-port OC12/STM-4 (OC-12) Interface Module

The 4-port OC3/STM-1 (OC-3) or 1-port OC12/STM-4 (OC-12) interface module can operate as up to four
STM-1 interfaces.
The optical interface module is designed for both OC-3 and OC-12 traffic. OC-12 is only supported on
Note
the RSP1 module on the router.
Cisco ASR 900 Series Aggregation Services Routers Data
Cisco ASR 902 and ASR 902U Aggregation Services Router Hardware Installation Guide
Interface Modules
theInterface Module Installation.
25