Table of Contents
Advertisement
C H A P T E R
4 :
G E T T I N G
T O
K N O W
T H E
O P E R A ™
F R A M E W O R K
View|Clear all Markers
Removes all markers from the current diagram
Measurement Menu
Measurement|Algorithm Parameters...
Opens the dialog to select the active algorithm and allows changing of the
parameters of the active algorithm.
Measurement|Name Measurement...
Opens a dialog that allows entering a name for the current measurement that
will appear on each diagram next to the diagram title.
Measurement|Start
Starts the measurement setup wizard.
Measurement|Stop
Interrupts the current measurement.
Measurement|Freeze Delay
Freeze Delay takes effect in Normal Mode of the Automatic Delay
Compensation. When activated, the current delay compensation is used for the
rest of the measurement.
Measurement|Snap Again
Snap Again takes effect when the Snap Mode of the Automatic Delay
Compensation has been chosen. When performing Snap Again, the delay is re-
determined and used for delay compensation from now on.
Measurement|Reset Averaged Values
Selecting Reset Averaged Values during a measurement will reset the
measurement values to zero and the system will begin to re-determine the
values up from that point of time. This option is reasonable for real time
measuring over a long period of time.
Measurement|Trigger
Currently there is only one trigger option available. This trigger selection of a
specific part of the signal for the analysis.
Help Menu
Help|Help Topics
Starts the online help.
79
Advertisement
Table of Contents
