Measuring Only Parts Of The Input Files - OPTICOM OPERA - V 3.5 User Manual

C H A P T E R 4 : G E T T I N G T O K N O W T H E O P E R A ™
F R A M E W O R K
Figure 4.44: Measurement Setup Wizard Step 1. Selection of the Soundboard
Figure 4.45: Format dialog

4.4.8 Measuring only parts of the Input Files

OPERA™ allows the use of a certain part of the input signals for the
measurement only. To use this feature, select the menu option
Measurement|Trigger. The dialog shown in Figure 4.46 will be displayed .
Figure 4.46: Trigger Dialog
When using this option, always check the Use this trigger option field. Now
enter the desired start and end offsets in ms into the fields Start after and End
75