C H A P T E R
4 :
G E T T I N G
F R A M E W O R K
interface it must be set to digital. Also take care, that on the playing side the
digital interfaces are neither selected as the monitoring source, nor as the
monitoring output.
It may seem unusual, but from the drop down list box for the interface selection
you can also choose telephony interfaces. Do not select those when in the
audio view. Nothing serious will happen, only the call will never connect due
to the missing telephone number etc. (There must be something left for the next
release...)
Figure 4.12:
OptiCall™ - Audio Standard View.
Figure 4.13:
Typical audio setup using only one interface.
T O
K N O W
T H E
O P E R A ™
43