Table of Contents
Advertisement
C H A P T E R
7 :
-Signal
StaticGainOn
InvertTestSignal
AutoInvertTestSig
DCFilterOn
-Trigger
StartTime
EndTime
Channel
-Out
-Append
–PassThrough
-Cfg
7.2.3 How to Use a Configuration File
A configuration file can be created containing e.g. frequently used settings of
parameters. Inside the configuration file all parameters listed above are allowed.
All parameters may be placed on separate lines. However between a command
line option and the associated parameters no line break is allowed.Configuration
files are best created using a text editor like notepad. To insert comment lines
into the configuration file, a ';' must be put at the beginning of the line. When
starting OPERA™ with a configuration file use the following syntax:
opera -Exec -Cfg <Name and path of the configuration file>
The configuration file must have the suffix ".cfg".
A combination of both versions may also be used:
opera -Exec -Cfg DefaultPara.cfg -Input Inp=0
Here the corresponding setting made in DefaultPara.cfg is overwritten by the -
Input command.
Note:
The command line parameters in the batch and configuration files
are case sensitive.
A U T O M A T I O N
A N D
<Start time>
<End time>
<0: Relate to reefernce | 1:
realte to test>
"<FileName>"
"<Additional Text>"
"<File name>"
File=InputFile1.wav
171
P R O G R A M M I N G
Switch the static gain
compensation on
Invert the test signal
Automatically invert the test
signal
Switch DC filtering on
Specify start point of the
measurement in ms
Specify end point of the
measurement in ms
Relate start and end point to
the beginning of the
refernce or the test signal
Name and path of result
output file
Append results to existing
result output file
The additional text will be
printed to the result file
Name and path of a
configuration file that
contains more command
line parameters
Advertisement
Table of Contents
