Parameters Common To All Algorithms - OPTICOM OPERA - V 3.5 User Manual

C H A P T E R 7 :

7.2.2 Parameters common to all Algorithms

Below the syntax of the command line parameters is described. For all
parameters inside a command section (i.e. –Input or –Mux) the section identifier
(e.g. "-Input") has to be typed only once, at the beginning.
Section Identifier Option
-Algorithm
Name
Settings
-Input
Inp=0 File="File1"
Inp=1 File="File2"
-Mux
InpRefLeft
InpRefRight
InpTestLeft
InpTestRight
ChannelRefLeft
ChannelRefRight
ChannelTestLeft
ChannelTestRight
-Delay
FixedDelay
Delay
TrackingOn
Channel
StaticDelay
A U T O M A T I O N A N D
Parameter
<PSQM | PESQ | ECHO |
PEAQ>
"more parameters"
<0 | 1>
<0 | 1>
<0 | 1>
<0 | 1>
<0 for left | 1 for right>
<0 for left | 1 for right>
<0 for left | 1 for right>
<0 for left | 1 for right>
<delay>
<0 for left | 1 for right>
<Delay in ms>
170
P R O G R A M M I N G
Description
Name of the algorithm to be
used
Parameters that algorithm
specific. See the algorithms
description for details .Note
that the parameters must be
enclosed in qotes!
File name used for input 1
File name used for input 2
Input used to form the left
channel of the refernce
signal
Input used to form the right
channel of the reference
signal
Input used to form the left
channel of the test signal
Input used to form the right
channel of the test signal
Channel of input signal used
to form the left channel of
the refernce signal (0=left,
1=right)
Channel of input signal used
to form the right channel of
the refernce signal (0=left,
1=right)
Channel of input signal used
to form the left channel of
the test signal (0=left,
1=right)
Channel of input signal used
to form the right channel of
the test signal (0=left,
1=right)
Use a fixed delay for the
measurement
Specify the fixed delay in
samples
Switch delay tracking on
Channel used for the
automatic delay
compensation
Additional static delay of the
reference signal in ms