Table of Contents
Advertisement
C H A P T E R
6 :
Figure 6.19: The PSQM Final Result diagram type
6.5.5 Command Line Arguments
In addition to the command line arguments described in Chapter 4 specific
commands will be described in this section.
PSQM currently interprets the following algorithm specific command line
switches. If no switches are specified, the default settings for correct
measurements according to P.861 will be chosen (45dB Hoth noise, 4kHz
upper limit, IRS filer, 101dBSPL listening level).
These commands are to be used together with the -Algorithm Name=PSQM
switch:
T E L E P H O N Y
B A N D
T E S T I N G
134
V O I C E
Q U A L I T Y
Advertisement
Table of Contents
