C H A P T E R
3 :
3 INSTALLATION AND
SETUP
Using OPERA™ for the first time.
P
lease review this chapter before you continue. Checking the complete
contents of your OPERA™ system may help in the future to solve
potential problems.
This chapter includes the installation and setup information for the
whole OPERA™ product family. Please refer to the section of the product you
have purchased.
3.1 OPERA™ Software Suite
3.1.1 Unpacking the Software
After unpacking the Software Suite, please check the delivery for completeness
first. The delivery should include the following parts:
•
One OPERA™ Software Suite CD.
•
One CD with reference wave files and the conformance test set
(PEAQ only).
•
One dongle (hardware key, a small grey box which is to be
attached to the printer port).
•
This manual.
3.1.2 System Requirements
Please verify that your computer meets or exceeds either of the following
system requirements:
•
>=128MB of RAM, 256MB are recommended
•
Screen resolution 1024*768, >=64k colors.
I N S T A L L A T I O N
A N D
23
S E T U P
3
Chapter