Table of Contents
Advertisement
C H A P T E R
4 :
G E T T I N G
T O
K N O W
T H E
O P E R A ™
F R A M E W O R K
after
respectively. Finally choose whether the start and end time should be
related to the beginning of the reference or to the beginning of the test file. This
selection is required since one of the two signals may be delayed by the time
alignment algorithm.
4.4.9 Printing
When making a printout of the measurement results first check the printer
settings. Select the menu option File|Print Setup... The standard windows Print
Setup dialog will appear. Close this dialog with the button OK.
Before printing, check what the printout of the measurement results will look
like. By selecting the menu option File|Print Preview another window will
open as shown in Figure 4.47. By clicking on the Print button on the toolbar
the printing will start.
Print the diagram view from the menu option File|Print or by selecting the
File|Print
toolbar button showing the printer symbol. Figure 4.47 shows both diagram
panels and the display of the measurement settings on the right-hand side of the
diagrams will be printed.
Figure 4.47: The Print Preview window
4.4.10 Exporting Graphs
For further documentation of your measurements export certain diagrams. This
is possible by a copy and paste procedure.
At first select the diagram pane to be copied. When clicking on a diagram it will
Edit|Copy
get the focus which is indicated by a bold frame around the entire pane. Now
select the menu option Edit|Copy (or the Copy toolbar button) the diagram that
has the focus will be put into the clipboard buffer. Paste it into an editor that is
capable of processing both, graphics and text.
76
Advertisement
Table of Contents
