OPTICOM OPERA - V 3.5 User Manual page 59

Objective perceptual analyzer
Hide thumbs Also See for OPERA - V 3.5:
Table of Contents

Advertisement

C H A P T E R
4 :
G E T T I N G
F R A M E W O R K
-TerminatingLine
-Player
-Recorder
-Host
-ListDevices
Both play files should be of approximately the same duration (±0.25s).
To find the proper index of an interface, open OptiCall™ in the GUI mode,
and click on the drop down list box as if to change the terminating or the
originating interface. Find that all entries in the list box start with a number.
This number is the index of the line. In the future, a command line tool that
may be used to query the index for a certain interface may be provided.
If either the terminating or the originating side is an audio interface and not
a telephony device, the timing printed to stdout as a result of the call is
meaningless. It is only provided in order to maintain compatibility between
scripts.
Example (should be written on one line):
Make a loop call from line 0 to Line 1, dial 01234, use the default reference
file and store the results in C:\\temp, as Test-line0 (degraded file) and Test-
line1 (echo signal).
Opticall /Exec -Loop -OriginatingLine 0 -TerminatingLine 1 -
Phonenumber 01234 -RefFileOrigin
C:\programme\opera\WaveFiles\DefaultReffile.wav -
RefFileTermination
C:\programme\opera\WaveFiles\DefaultReffile.wav -
DestinationPath c:\temp -RootFilename Test
There are some important rules that should be obeyed in order to perform
successful measurements:
T O
K N O W
T H E
O P E R A ™
<0|..N>
<Bitmask>
<Bitmask>
<hostname>
53
interface
Index of the
terminating interface
The bitmask defines
which interface is
sending (playing) the
file. Bit 0 is the
originating interface
and bit 1 is the
terminating
interface. Enter 3
for both interfaces.
The bitmask defines
which interface is
receiving (recording)
the file. Bit 0 is
the originating
interface and bit 1
is the terminating
interface. Enter 3
for both interfaces.
Name of the OPERA
system on which the
program should
execute. This
parameter is subject
to a special network
license!
List all interfaces
available for test
calls. May be used
together with –Host.
Some Important
Hints

Advertisement

Table of Contents
loading

This manual is also suitable for:

OperaOpera telecomOpera broadcast

Table of Contents