Opera™ Software Suite - OPTICOM OPERA - V 3.5 User Manual

C H A P T E R 1 :
measurements, the corresponding required interfaces and cables will be
provided. Of course assessing prerecorded files is possible too. For a detailed
description of the delivery , please refer to Section 3.2.2. Again, combinations
of Telecom and Broadcast Configurations of the OPERA™ Measurement System
are available.
Figure 1.2 shows a photograph of the OPERA™ Portable.
Figure 1.2: The Portable PC version of OPERA™
1.2.2 OPERA™ Software Suite
OPERA™ is also available as a Software Suite, which is delivered without any
hardware. A description of the corresponding hardware requirements can be
found in the "Installation and Setup" chapter in Section 3.1.2 and in the
"Technical Specifications" chapter.
In contrast to the Workstation or the Portable PC Version of OPERA™, the
Software Suite supports file based measurements only. Live measurements are
not supported. Measurement functionality and performance will be the same as
for the hardware based OPERA™ system in the file based mode. However,
processing time may vary with the available processing power of the PC.
Note:
Even if there is an audio board installed in your system, no live
measurements are possible with the Software Suite.
I N T R O D U C T I O N
12