C H A P T E R
4 :
G E T T I N G
T O
K N O W
T H E
O P E R A ™
F R A M E W O R K
Figure 4.8: LynxONE mixer setting for an analog reference signal
Figure 4.9: LynxONE mixer setting for an analog test signal
Figure 4.8 and Figure 4.9 represent the typical settings for a measurement
input signals. As shown in the example in Figure 4.8, the Source
with
analog
for the Sample Clock is Internal, the Reference is set to Auto and Auto Selection
is turned on. Figure 4.9 shows the mixer settings for the test signal. The
Source for the Sample Clock is Header, the Reference is set to Word and Auto
Selection is turned on.
38