Table of Contents
Advertisement
C H A P T E R
4 :
G E T T I N G
F R A M E W O R K
Note:
The
Terminate all
As you can see in Figure 4.19, the list boxes for selection of the originating
and the terminating interfaces are disabled now. Apart from that, the OptiCall™
window is the same as in the Termination mode.
Figure 4.19: The OptiCall™ window in Terminate all mode configuration
Since OptiCall™ will only perform the data acquisition you will have to employ
the OPERA™ program for the actual measurement. In OPERA™ the following
assignments must be made to achieve proper results when using the PSQM or
PESQ algorithm (all referring to the file name settings mentioned above):
Reference file:
c:\programme\Opera\DefaultRefFile.wav
Test file:
c:\temp\demo-line0.wav
Expert View
The Expert View is exactly the same as the Telephony Standard View, just there
are many more options available which are otherwise accessible through the
command line interface only. The dialog layout is shown in
T O
K N O W
T H E
mode is not available for audio interfaces!
49
O P E R A ™
Figure 4.20
.
Advertisement
Table of Contents
