OPTICOM OPERA - V 3.5 User Manual page 121

C H A P T E R 5 : W I D E
In this file all the settings for the measurement are defined. The path and
filename of the reference, the test file and of the result file are passed to the file
by parameters.
Use pushd and popd in a batch program to return to the directory where the
batch program was started. See the MS Windows help for details.
RunPeaqBasic.bat is called from the file ConfPeaqBasic.bat where all
the files from the DB3 are entered. See the following lines that show the content
of ConfPeaqBasic.bat. Note that the parameters that follow the command
"call" must be written into one line. Again, those lines had to be wrapped in the
absence of space in this manual.
@echo off
rem batch file to compute PEAQ for the DB3. OPERA must be
rem installed on drive C!
rem Parameters:
rem
rem ConfPeaqBasic
rem
rem OperaPath:
rem
rem
rem DB3Path:
rem
rem Outputfile: Results are stored in this file. If it
rem
rem
rem
rem
echo ******************************************************
echo ***** ConfPeaqBasic
echo ******************************************************
echo.
@echo on
call RunPeaqBasic %1 %2\Conformance-BS.1387\arefsna.wav
%2\Conformance-BS.1387\acodsna.wav %3
call RunPeaqBasic %1 %2\Conformance-BS.1387\breftri.wav
%2\Conformance-BS.1387\bcodtri.wav %3
call RunPeaqBasic %1 %2\Conformance-BS.1387\crefsax.wav
%2\Conformance-BS.1387\ccodsax.wav %3
call RunPeaqBasic %1 %2\Conformance-BS.1387\drefryc.wav
%2\Conformance-BS.1387\dcodryc.wav %3
call RunPeaqBasic %1 %2\Conformance-BS.1387\erefsmg.wav
%2\Conformance-BS.1387\ecodsmg.wav %3
call RunPeaqBasic %1 %2\Conformance-BS.1387\frefsb1.wav
%2\Conformance-BS.1387\fcodsb1.wav %3
call RunPeaqBasic %1 %2\Conformance-BS.1387\freftri.wav
%2\Conformance-BS.1387\fcodtr1.wav %3
call RunPeaqBasic %1 %2\Conformance-BS.1387\freftri.wav
%2\Conformance-BS.1387\fcodtr2.wav %3
call RunPeaqBasic %1 %2\Conformance-BS.1387\freftri.wav
%2\Conformance-BS.1387\fcodtr3.wav %3
call RunPeaqBasic %1 %2\Conformance-BS.1387\grefcla.wav
%2\Conformance-BS.1387\gcodcla.wav %3
call RunPeaqBasic %1 %2\Conformance-BS.1387\hrefryc.wav
%2\Conformance-BS.1387\hcodryc.wav %3
B A N D A U D I O
<OperaPath> <DB3Path> <Outputfile>
Drive and path of the OPERA installation
directory
Drive and path of the DB3 test items
exists already results are appended to it,
otherwise it will be newly created.
V1.0 (c) OPTICOM, 1999
115
Q U A L I T Y T E S T I N G
***
ConfPeaqBasic.bat