Table of Contents
Advertisement
C H A P T E R
4 :
G E T T I N G
T O
K N O W
T H E
O P E R A ™
F R A M E W O R K
Figure 4.39: Select Result Type Window
Now highlight the radio button next to Timesignals, and press Next. This leads
to the next wizard step, the Signal Select dialog.
The Select Signal dialog (see Figure 4.40) allows a selection of channels and
input signals required for the results in one diagram. Modify the selection by
clicking with the left mouse button on any of the option buttons. This will add
or remove the check mark in the button. A checked button means that the
results for the selected signal will be drawn in the diagram. In Figure 4.40
the results for the left channel of the reference and the test signal were selected.
70
Advertisement
Table of Contents
