Table of Contents
Advertisement
C H A P T E R
4 :
G E T T I N G
T O
K N O W
T H E
O P E R A ™
F R A M E W O R K
Figure 4.10 and Figure 4.11 represent the typical settings for a
measurement with
input signals. As shown the mixer settings
digital (AES-EBU)
for the reference signal in Figure 4.10 the Source for the Sample Clock is set
to Digital, the Reference is set to Auto and Auto Selection is turned on. Figure
4.11 shows the mixer settings for the test signal. The Source for the Sample
Clock is Digital, the Reference is set to Auto and Auto Selection is turned on.
Figure 4.10: LynxONE mixer setting for a digital (AES-EBU) reference signal
Figure 4.11: LynxONE mixer setting for a digital (AES-EBU) test signal
39
Advertisement
Table of Contents
