Front Panel Leds And Buttons; Rear Panel Components - HP 12000 User Manual

Front Panel LEDs and Buttons

Item Description
1 UID button/LED
2 Health LED
3 Power On/Standby button and system power LED

Rear Panel Components

Item Description
1 Slot 1 PCIe2 x8 (8, 4, 2, 1)
2 Slot 2 PCIe2 x16 (16, 8, 4, 2, 1), 75W +EXT 75W
3 Power supply 1
Status
Blue = Identification is activated.
Flashing blue = System is being remotely managed.
Off = Identification is deactivated.
Green = System health is normal.
Amber = System health is degraded. To identify the
component in a degraded state, see
Insight Display LEDs and Internal Health LED
Combinations.
Red = System health is critical. To identify the
component in a critical state, see
Display LEDs and Internal Health LED
Off = System health is normal (when in standby
mode).
Green = System is on.
Amber = System is in standby, but power is still
applied.
Off = Power cord is not attached, power supply
failure has occurred, no power supplies are installed,
facility power is not available, or the power button
cable is disconnected.
1
1, 2
VLS Node Components, LEDs, and Buttons
HP Systems
HP Systems Insight
Combinations.
147