HP 12000 User Manual page 53

Status message
Mirror Preprocess Pending*
Mirror Postprocessing*
Cleanup*
Eject Broken
Header Broken
Restore Broken
Restore Pending
Paused
Managed
Acquired
Positioning
Copying
Readmeta
Writemeta
Rewind
Empty Tape
Copying
Used Tape
Full Tape
Unloaded Full Tape
Waiting for Load
Tape Currently Not Needed
Bad Tape
Unloaded Tape
Waiting for Load
Tape Currently Not Needed
Ready For Import
Importing
Import Complete
Unloaded Completed Tape
Pool type Description
Echo Copy A mirror preprocess job is awaiting resources in order to run.
Echo Copy Expanding deduplication instructions to update the target cartridge.
Echo Copy Cleaning up replication data on the source.
Echo Copy A problem occurred when attempting to eject a physical cartridge.
Echo Copy A problem occurred during source cartridge creation process.
Echo Copy A problem occurred while restoring a cartridge.
Echo Copy A restore job is awaiting resources in order to run.
Echo Copy A mirror job was paused.
Smart Copy Inactive.
Smart Copy Reserved by the backup application for I/O commands.
Smart Copy The backup application is adjusting the read/write position.
Smart Copy The backup application is copying data to/from the cartridge.
Smart Copy The backup application is reading metadata from the cartridge.
Smart Copy The backup application is writing metadata to the cartridge.
Smart Copy The backup application is rewinding the cartridge.
Tape Export The physical tape has not yet been used yet.
Tape Export Copying a source virtual cartridge onto this physical tape.
Tape Export Tape contains export data.
Tape Export Tape contains export data and is ready to be ejected. Signal to tape
operator to unload this tape from the physical library.
Tape Export Tape contains export data and has been ejected. This tape should be
included in the collection to be sent to the target site.
Tape Export Tape that contains data that will be imported when the tape operator
moves it into an Import pool slot. Signal to tape operator to load this
tape into the physical library.
Tape Export Tape in an Import pool slot that is in the catalog, but not needed yet.
Signal to tape operator to remove the tape from the physical library.
Tape Export Unable to write tape. It does not contain any export data and is ready
to be ejected. This tape should NOT be sent to the target site.
Tape Import Tape that contains data that will be imported later.
Tape Import Tape that contains data that will be imported when the tape operator
moves it into an Import pool slot. Signal to tape operator to load this
tape into the physical library.
Tape Import Tape in an Import pool slot that is in the catalog, but not needed yet.
Signal to tape operator to remove the tape from the physical library.
Tape Import Tape in an Import pool slot that is in the catalog.
Tape Import Actively copying data from the physical tape to the target virtual
cartridge.
Tape Import All data has been copied from the physical tape to the target virtual
cartridges. Signal to tape operator to remove the tape from the physical
library.
Tape Import All data has been copied and the tape has been ejected.
SAN Destination Library Operations 53