Rack Stability; Contacting Hp; Before You Contact Hp - HP 12000 User Manual

WARNING!
CAUTION:
NOTE: Provides additional information.
The following equipment symbols may be found on hardware to which this guide pertains. They
have the following meanings:
WARNING!
indicate the presence of electrical shock hazards. The enclosed area contains no operator
serviceable parts.
WARNING: To reduce the risk of injury from electrical shock hazards, do not open this enclosure.
WARNING!
connection.
WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into this receptacle.
WARNING!
the presence of a hot surface or hot component. Contact with this surface could result in injury.
WARNING: To reduce the risk of injury from a hot component, allow the surface to cool before
touching.
WARNING!
presence of multiple sources of power.
WARNING: To reduce the risk of personal injury from electrical shock, remove all power cords to
completely disconnect power from the power supplies and systems.
WARNING!
component exceeds the recommended weight for one individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment, observe local
occupational health and safety requirements and guidelines for manually handling material.

Rack Stability

Rack stability protects personnel and equipment.
WARNING!
Extend leveling jacks to the floor.
Ensure that the full weight of the rack rests on the leveling jacks.
Install stabilizing feet on the rack.
In multiple-rack installations, fasten racks together securely.
Extend only one rack component at a time. Racks can become unstable if more than one
component is extended.

Contacting HP

170 Support and Other Resources
Indicates that failure to follow directions could result in bodily harm or death.
Indicates that failure to follow directions could result in damage to equipment or data.
These symbols, which mark an enclosed surface or area of the equipment,
These symbols, which mark an RJ-45 receptacle, indicate a network interface
These symbols, which mark a surface or area of the equipment, indicate
Power supplies or systems marked with these symbols indicate the
Any product or assembly marked with these symbols indicates that the
To reduce the risk of personal injury or damage to equipment: