HP 12000 User Manual page 98

2. If not:
a. Click the System tab.
b. Select the library in the navigation tree to which you want to add tape drives.
c. Click Create Tape Drive in the task bar.
The Tape Drive Parameters window opens
Figure 19 Create Virtual Library Wizard window (5 of 12)
3. Select the type of physical tape drive to emulate.
4. Enter the Fibre Channel host port and node on which to present the tape drives in the Port
Mapping box.
Only one port or port pair may be selected.
5. Click Next Step.
The next Tape Drive Parameters window opens
Figure 20 Create Virtual Library Wizard window (6 of 12)
6. Enter the number of tape drives you want to create in the library at this time in the Tape Drives
box, if different from the default value.
You can add more tape drives to the library later. The Tape Drives box defaults to the standard
number of drives for the library type.
98 Configuration
(Figure 19 (page 98)).
(Figure 20 (page 98)).