Fbdimm - HP 12000 User Manual

5. To remove fan module 2 or 3:
a. Remove the power supply air baffle.
b. Remove fan module 2 or 3.
To replace the component, reverse the removal procedure.
IMPORTANT:
ensure the connectors are seated properly.

FBDIMM

1. Power off the node.
2. Extend or remove the node from the rack. See
Removing a VLS Node from the
3. Remove the access panel.
4. Open the FBDIMM slot latches.
5. Remove the FBDIMM.
CAUTION:
adversely affect data integrity.
To replace the component, reverse the removal procedure.
After installing the fan module, firmly press the top of the module connectors to
Use only Compaq branded or HP FBDIMMs. FBDIMMs from other sources may
Extending a VLS Node from the Rack
Rack.
VLS Node Component Replacement
or
161