Configuring Automigration Job Reports; Viewing The Job History - HP 12000 User Manual

Job type – Mirror Preprocessing or Mirror
Start time
% complete
Time of the last update
Source and target locations
The node the job is running on
Status – active or pending
Expected completion time
The drive the job is running on
Change the number of rows displaying on the screen using the Page Size menu. You can also use
the Filter by View menu to display a specific, predefined set of information; see
Automigration Job Reports" (page 67)
of these menus, click Refresh.

Configuring Automigration Job Reports

The Configuration screen allows you to assign default settings for reports.
1. Select the Automigration/Replication tab.
2. In the navigation tree, expand Configuration Summary.
3. Select Job Reporting Configuration from the expanded list.
You can customize the following defaults:
Refresh time for the display (1 to 15 minutes)
Duration of the job status graphs to display (1 to 90 days)
Reporting data retention period (1 to 90 days)
Duration of the CSV format export file (1 to 90 days)
Name for the CSV format export file
You can also create a pre-defined custom view based on the locations you choose:
1. Select a location category.
2. Select the specific locations of interest from the Available Locations box. You can select multiple
devices by using Ctrl+click.
3. Using the >> button, or by double-clicking, move the locations of interest into the Selected
Locations box. These are the locations that will display in the report. You can use << button
to remove locations from the Selected Locations box.
4. Select another location category and repeat steps 2 and 3.
5. Enter a name for this view in the Create a New View field.
6. Select Create View. This view is now available as a selection in the Views list on the Job
History screen.
To update an existing view, select it from the Update existing view list, adjust the selected locations,
rename the view (if desired) in the name field, and select Update View. Select Delete View if you
want to remove that view from your pre-defined options.
At any time, you can change any of these default settings.

Viewing the Job History

The Job History screen displays the history of the completed library jobs. It defaults to SAN jobs
only, and displays the number of days set as the default on the Configuration screen.
to create the views. After making a choice from one or both
"Configuring
Automigration/Replication Reporting 67