MACROMEDIA FLEX-FLEX ACTIONSCRIPT LANGUAGE Reference page 569

Description
Read-only property; returns the number of the frame in which the playhead is located in the
Timeline specified by
Example
The following example uses the
actionClip_mc
actionClip_mc.gotoAndStop(actionClip_mc._currentframe + 5);
MovieClip.curveTo()
Availability
Flash Player 6.
Usage
my_mc.curveTo(controlX:Number, controlY:Number, anchorX:Number, anchorY:Number)
: Void
Parameters
An integer that specifies the horizontal position of the control point relative to the
controlX
registration point of the parent movie clip.
An integer that specifies the vertical position of the control point relative to the
controlY
registration point of the parent movie clip.
An integer that specifies the horizontal position of the next anchor point relative to the
anchorX
registration. point of the parent movie clip.
An integer that specifies the vertical position of the next anchor point relative to the
anchorY
registration point of the parent movie clip.
Returns
Nothing.
Description
Method; draws a curve using the current line style from the current drawing position to
( ,
anchorX anchorY
drawing position is then set to (
content created with the Flash drawing tools, calls to
content. If you call
defaults to (0, 0). If any of the parameters are missing, this method fails and the current drawing
position is not changed.
You can extend the methods and event handlers of the MovieClip class by creating a subclass.
.
my_mc
_currentframe
to advance five frames ahead of its current location:
) using the control point specified by (
anchorX
before any calls to
curveTo()
property to direct the playhead of the movie clip
controlX
, ). If the movie clip you are drawing in contains
anchorY
curveTo()
, the current drawing position
moveTo()
, ). The current
controlY
are drawn underneath this
MovieClip.curveTo() 569