Removing The Top Cover Of The Inverter; Figure 3-1 Removing The Cover From The Inverter - Xantrex7 UX - REV A Owner's Manual

3.0 Installation

Removing the Top Cover of the Inverter

3
28
• Remove the four #12 X 1/2" Phillips SMS SST type A screws from the top of the
unit (#1-4 in Figure 3-1).
• Remove the one 6-32 X 5/16" Phillips PMS S/S screw and #6 internal tooth, star
washer from the side of the unit (#5 in Figure 3-1).
2
4
5
Figure 3-1
Removing the Cover from the Inverter
1
©2002 Xantrex Technology Inc. All Rights Reserved.
P/N 975-0026-01-01 Rev A 06/2002