Unpacking And Inspection; Model Identification And Numbering Conventions - Xantrex7 UX - REV A Owner's Manual

1.0 Introduction

Unpacking and Inspection

NOTE: The unit weighs 25-40 lb/
11.4–18.2 kg (depending
on model). Have additional
help available if necessary,
to assist in lifting the unit
during installation.

Model Identification and Numbering Conventions

Product Family
Output Power
©2002 Xantrex Technology Inc. All Rights Reserved.
P/N 975-0026-01-01 Rev A 06/2002
• Carefully unpack the inverter from its shipping carton.
• Verify all of the items listed on the packing material sheet are present. If any
items are missing, please contact Xantrex Customer Service at 360.435.8826.
• Save your proof-of-purchase. This is required if the unit should require
warranty service.
• Save the original shipping carton and packing materials! If the inverter ever
needs to be returned for service, it should be shipped in the original carton.
This is also a good way to protect the inverter if it ever needs to be moved.
• Record the unit's model, serial number and date of purchase in the
appropriate fields on page C-6 in Appendix C, Product Information and
Warranty.
The UX Series inverter is identified by the model/serial number label located
next to the AC access cover. All the necessary information is provided on the
label such as AC output voltage, power, and frequency (punch holes).
The inverter also has a letter designator followed by 3 or 4 digits (depending on
the version). The model number describes the type of inverter, the output
specifications, the required battery voltage and the output voltage and
frequency.
"UX" indicates the type of inverter - UX Series.
"11" the first two digits of the numerical designator indicate the inverter's
output power (in hundreds of watts) - 1100 Watts.
"12" the second two digits indicate the required nominal battery bank voltage -
12 Vdc.
"E" the letter suffix code indicates the export output voltage and frequency of
the inverter - 230 Vac/50 Hz. No letter indicates 120 Vac/60 Hz.
See Table 1-1, Output Parameters by Model Suffix Code on page 4.
"SB" indicates the inclusion of an optional, built-in, three-stage, standby
battery charger.
Example: UX 1112 E, SB
Country Code (No letter = 120 Vac/60 Hz)
Optional Standby Battery Charger
Battery Voltage
3