Features And Options; Standard Features; Options - Xantrex7 UX - REV A Owner's Manual

1.0 Introduction

Features and Options

Standard Features

Options

RC8 Remote Control
Battery Temperature Sensor
2
The UX Series inverter is an economical product designed to provide a reliable
supply of electricity to all the essential circuits of a home or business. Critical
loads can be powered for hours or days, depending on the size of the system
battery-bank. When connected to the utility grid, the optional battery charger
quickly recharges the batteries.
• Modified Sine Wave Power
The UX Series inverters provide a modified sinewave output which operates
most AC appliances and equipment.
• Simplicity
The UX Series is simple to operate. All inverter and optional battery charger
controls are located on the AC end panel.
• High Efficiency
The inverter operates at over 90% efficiency through most of its power range.
• Low Power Consumption
UX Series inverters use extremely low current while in the search mode,
consuming little more than one watt of power. In the ON mode, the inverter uses
less than 8 watts of power.
The following options are available for the UX Series inverter:
• SB Option (Battery Charger/AC Transfer Relay)
The inverter can be equipped with a three-stage battery charger designed to
recharge typical, deep-cycle batteries.
The built-in, AC transfer relay automatically transfers power from the utility to
the inverter and handles 30 amps of current at 120 Vac (15 amps of current at
230 Vac).
• RC8/50
The RC8 allows the inverter to be switched ON or OFF remotely and includes an
LED status indicator.
• Battery Temperature Sensor
The battery temperature sensor (BTS) ensures proper charging of the batteries
based on temperature. Installing a BTS extends battery life by preventing
overcharging in warm temperatures and undercharging in cold temperatures.
©2002 Xantrex Technology Inc. All Rights Reserved.
P/N 975-0026-01-01 Rev A 06/2002