Configuring Dscp - Cisco QuickVPN - PC Administration Manual
Wireless-n gigabit security router with vpn
Hide thumbs
Also See for QuickVPN - PC:
- Administration manual (244 pages) ,
- User manual (112 pages) ,
- Administration manual (107 pages)
Table of Contents
Advertisement
Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the QoS Settings
STEP 3
STEP 1
STEP 2
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Click Save.
Configuring DSCP
The QoS > DSCP Setup window displays the settings for configuring DSCP as the
trust mode for QoS for each LAN port.
To configure DSCP setup settings, follow these steps:
Click QoS > DSCP Setup.
Configure the DSCP setup settings for the router:
•
DSCP—The Differentiated Services Code Point value in the incoming
packet.
•
Queue—Select the traffic forwarding queue, 1 to 4, to which the DSCP
priority is mapped.
•
Restore Defaults—Click this button to restore the default DSCP values.
5
130
Advertisement
Table of Contents
