Cisco QuickVPN - PC Administration Manual page 54

Setting Up and Configuring the WRVS4400N Wireless-N Router
Setting Up Your Wireless-N Router
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
• Connect on Demand: Max Idle Time—Configure the router to cut the
Internet connection after it has been inactive for a specified period of time
(Max Idle Time). If your Internet connection has been terminated due to
inactivity, Connect on Demand enables the router to automatically re-
establish your connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the Connect on
Demand option and enter the number of minutes you want to have elapsed
before your Internet connection terminates in the Max Idle Time field. Use
this option to minimize your DSL connection time if it is charged based on
time. This option is disabled by default.
• Keep Alive Redial period—If you select this option, the router periodically
checks your Internet connection. If you are disconnected, then the router
automatically reestablishes your connection. To use this option, click the
option next to Keep Alive. In the Redial Period field, you specify how often
you want the router to check the Internet connection. This option is enabled
by default and the default Redial Period is 30 seconds. Use this option to
minimize your Internet connection response time as it is always connected.
5
54