Cisco QuickVPN - PC Administration Manual page 187

Troubleshooting
STEP 7
STEP 8
STEP 9
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Select Use the following DNS server addresses, and enter the Preferred DNS
server and Alternative DNS server (provided by your ISP). Contact your ISP or go
on its website to find the information.
Click OK in the Internet Protocol (TCP/IP) Properties window, and click OK in the
Local Area Connection Properties window.
Restart the computer if asked.
Windows XP
Click Start and Control Panel.
Click the Network and Internet Connections icon and then the Network
Connections icon.
Right-click the Local Area Connection associated with your Ethernet adapter, and
click Properties.
In the This "connection uses the following items" box, select Internet Protocol
(TCP/IP). Click Properties.
Select Use the following IP address, and enter a unique IP address that is not
used by any other computer on the network connected to the router. You can only
use an IP address in the ranges 192. 1 68. 1 .2 to 192. 1 68. 1 .99 and 192. 1 68. 1 . 1 51 to
192. 1 68. 1 .254.
Enter the Subnet Mask, 255.255.255.0.
Enter the Default Gateway, 192.168.1.1 (Router's default IP address).
Select Use the following DNS server addresses, and enter the Preferred DNS
server and Alternative DNS server (provided by your ISP). Contact your ISP or go
on its website to find the information.
Click OK in the Internet Protocol (TCP/IP) Properties window. Click OK in the Local
Area Connection Properties window.
A
187