Viewing Status - Cisco QuickVPN - PC Administration Manual

Setting Up and Configuring the WRVS4400N Wireless-N Router

Viewing Status

Viewing Status
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
• Force Version—The default protocol version to use. Select Normal (uses
RSTP) or Compatible (compatible with old STP). The default is Normal.
• Protocol Enable—Check this box to enable RSTP on the associated port.
The default is unchecked (RSTP disabled).
• Edge—Check this box to specify that the associated port is an edge port
(end station). Uncheck the box to specify that the associated port is a link
(bridge) to another STP device. The default is checked (edge port).
• Path Cost—The RSTP path cost for the designated ports. Enter a number
from 1 to 200000000, or auto (autogenerated path cost). The default is
auto.
The Status window allows you to view the current status on this router:
• "Viewing WAN/Gateway Status" on page 161
• "Viewing Local Network Status" on page 163
• "Viewing Wireless LAN Status" on page 165
• "Viewing System Performance" on page 166
5
160