Configuring Ipsec Vpn - Cisco QuickVPN - PC Administration Manual
Wireless-n gigabit security router with vpn
Hide thumbs
Also See for QuickVPN - PC:
- Administration manual (244 pages) ,
- User manual (112 pages) ,
- Administration manual (107 pages)
Table of Contents
Advertisement
Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the VPN Settings
STEP 1
STEP 2
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Configuring IPSec VPN
The VPN > IPSec VPN window displays settings for configuring a VPN tunnel.
Virtual Private Network (VPN) is a security measure that creates a secure
connection between two remote locations. Configure these settings so that the
gateway creates VPN tunnels.
To configure the VPN Gateway to create VPN tunnels, follow these steps:
Click VPN > IPSec VPN.
Configure the gateway to create the VPN tunnels:
•
Select Tunnel Entry—Select a tunnel to configure.
•
Delete—Deletes all settings for the selected tunnel.
•
Summary—Shows the settings and status of all enabled tunnels.
•
IPSec VPN Tunnel—Click Enable option to enable this tunnel.
•
Tunnel Name—Enter a name for this tunnel, such as "LA Office."
5
116
Advertisement
Table of Contents
