Cisco QuickVPN - PC Administration Manual page 33

Getting Started with the WRVS4400N Router
Installing the Router
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Connect an Ethernet network cable from your cable or DSL modem to the Internet
port on the router's back panel.
Power on the cable or DSL modem.
Connect the power adapter to the Power port on the router and plug the other end
into an electrical outlet.
The Power and Internet LEDs on the front panel will light up green as soon as the
power adapter is connected properly.
Power on the PCs.
The router hardware installation is now complete.
4
33