Configuring The Qos Settings - Cisco QuickVPN - PC Administration Manual

Setting Up and Configuring the WRVS4400N Wireless-N Router

Configuring the QoS Settings

STEP 3
Configuring the QoS Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
• L2TP Passthrough—Layer 2 Tunneling Protocol is the similar to PPP but
allows Layer 2 and the PPP session to terminate at different servers or
locations. L2TP Passthrough is enabled by default. To disable L2TP
Passthrough, select Disabled.
Click Save.
This section describes how to configure the QoS settings of the router:
• "Managing Bandwidth" on page 127
• "Configuring QoS" on page 129
• "Configuring DSCP" on page 130
QoS allows you to perform bandwidth management, by either rate control or
priority. You can also configure the QoS Trust Mode and DSCP settings.
5
126