Configuring Cos Settings; Configuring Dscp Settings - Cisco RV132W Administration Manual

Quality of Service (QoS)

Configuring CoS Settings

Configuring CoS Settings
STEP 1
STEP 2
STEP 3

Configuring DSCP Settings

STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide
Use the link to the QoS Port-Based Settings Page to map the CoS priority setting
to the QoS queue.
To map CoS priority settings to the traffic forwarding queue:
Select QoS > CoS Settings.
For each CoS priority level in the CoS Settings Table, select a priority value from
the Traffic Forwarding Queue drop-down menu.
These values mark traffic types with higher or lower traffic priority depending on
the type of traffic.
Click Save.
To restore the default port-based QoS settings, click Restore Default and click
Save.
You can use the DSCP Settings page to configure DSCP-to-QoS queue mapping.
To configure DSCP-to-QoS queue mapping:
Select QoS > DSCP Settings.
Select whether only to list RFC values or to list all DSCP values in the DSCP
Settings Table by clicking the relevant button.
For each DSCP value in the DSCP Settings Table, select a priority level from the
Queue drop-down menu.
This maps the DSCP value to the selected QoS queue.
Click Save.
To restore the default DSCP settings, click Restore Default and Save.
7
120