Cisco QuickVPN - PC Administration Manual page 104

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring Firewall Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Creating a Policy
To create an Internet access policy, follow these steps:
Select a policy number from the Internet Access Policy drop-down menu.
Enter a Policy Name in the field provided.
Enable this policy by clicking the Enable option.
Click the Edit List of PCs button to select which personal computers are affected
by the policy. The List of PCs window appears. You can select a personal
computer by MAC address or IP address. You can also enter a range of IP
addresses if you want this policy to affect a group of personal computers. After
making your changes, click Save to apply your changes.
Click the appropriate option, Deny or Allow, depending on whether you want to
block or allow Internet access for the personal computers you listed on the List of
PCs window.
Decide what Days and what Times you want this policy to be enforced. Select the
individual days during which the policy is in effect, or select Everyday. Enter a
range of hours and minutes during which the policy is in effect, or select 24 Hours.
5
104